Pijp van het de rolbuizenstelsel van ASTM A269 TP304 316L de roestvrije
HAOSTEEL is één van de meest professionele fabrikant en de leverancier van de buis van het roestvrij staaltube.stainless staal kan in naadloze buis en gelaste buis volgens productiewijze worden verdeeld. De naadloze buis kan in warmgewalste buis, koudgewalste buis, koudgetrokken pijp en uitgedreven buis worden verdeeld. De gelaste pijp is verdeeld in rechte gelaste pijp en spiraal gelaste buis.
Beschrijving
De prestaties van deze reeks producten hebben de vereisten van het projectnormen van ASTM A269 APIRP5 C7 en JISG4305-door China National Petroleum Corporation, de Supervisie van de Aardoliepijpleiding en Inspectiecentrum, en het Bedrijf van CNOOC Bohai overgegaan. Deze reeks producten wordt geleverd aan de binnenlandse benutting van de land en overzeese olie en uitgevoerd. Singapore, Rusland en andere landen.
Punt | Materiële rang | Grootte | Lengte/broodje | Druk (Mpa) |
1 | 316L, 304L, 304 | 1/8 ″ ×0.025 ″ | 3200 | 80 |
2 | 316L, 304L, 304 | 1/8 ″ ×0.035 ″ | 3200 | 100 |
3 | 316L, 304L, 304 | 1/4 ″ ×0.035 ″ | 2000 | 100 |
4 | 316L, 304L, 304 | 1/4 ″ ×0.049 ″ | 2000 | 100 |
5 | 316L, 304L, 304 | 3/8 ″ ×0.035 ″ | 1500 | 80 |
6 | 316L, 304L, 304 | 3/8 ″ ×0.049 ″ | 1500 | 100 |
7 | 316L, 304L, 304 | 1/2 ″ ×0.049 ″ | 1000 | 80 |
8 | 316L, 304L, 304 | 1/2 ″ ×0.065 ″ | 1000 | 100 |
9 | 316L, 304L, 304 | φ3mm×0.7mm | 3200 | 80 |
10 | 316L, 304L, 304 | φ3mm×0.9mm | 3200 | 100 |
11 | 316L, 304L, 304 | φ4mm×0.9mm | 3000 | 100 |
12 | 316L, 304L, 304 | φ4mm×1.1mm | 3000 | 100 |
13 | 316L, 304L, 304 | φ6mm×0.9mm | 2000 | 100 |
14 | 316L, 304L, 304 | φ6mm×1.1mm | 2000 | 100 |
15 | 316L, 304L, 304 | φ8mm×1mm | 1800 | 80 |
16 | 316L, 304L, 304 | φ8mm×1.2mm | 1800 | 100 |
17 | 316L, 304L, 304 | φ10mm×1mm | 1500 | 70 |
18 | 316L, 304L, 304 | φ10mm×1.2mm | 1500 | 70 |
19 | 316L, 304L, 304 | φ10mm×2mm | 500 | 100 |
20 | 316L, 304L, 304 | φ12mm×1.5mm | 500 | 80 |
Opmerkingen: de materiële rang, grootte, lengte kan als cliënt requst aan opbrengst zijn. |
Het product toont:
Chemische Samenstelling over roestvrij staalbuis
Rang | C | Si | Mn | P | S | Ni | Cr | Mo |
201 | ≤0.15 | ≤0.75 | 5.5-7.5 | ≤0.06 | ≤0.03 | 3.5-5.5 | 16.0-18.0 | - |
202 | ≤0.15 | ≤1.0 | 7.5-10.0 | ≤0.06 | ≤0.03 | 4. - 6,0 | 17.0-19.0 | - |
301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 6.0-8.0 | 16.0-18.0 | - |
302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 8.0-10.0 | 17.0-19.0 | - |
304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 8.0-10.5 | 18.0-20.0 | - |
304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 9.0-13.0 | 18.0-20.0 | - |
309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 12.0-15.0 | 22.0-24.0 | - |
310S | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.035 | ≤0.03 | 19.0-22.0 | 24.0-26.0 | - |
316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 |
321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 9.0-13.0 | 17.0-19.0 | - |
630 | ≤0.07 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 3.0-5.0 | 15.5-17.5 | - |
631 | ≤0.09 | ≤1.0 | ≤1.0 | ≤0.030 | ≤0.035 | 6.50-7.75 | 16.0-18.0 | - |
904L | ≤2.0 | ≤0.045 | ≤1.0 | ≤0.035 | - | 23.0-28.0 | 19.0-23.0 | 4.0-5.0 |
2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.030 | ≤0.02 | 4.5-6.5 | 22.0-23.0 | 3.0-3.5 |
2507 | ≤0.03 | ≤0.80 | ≤1.2 | ≤0.035 | ≤0.02 | 6.0-8.0 | 24.0-26.0 | 3.0-5.0 |
2520 | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.045 | ≤0.03 | 0.19-0.22 | 0.24-0.26 | - |
410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | - | 11.5-13.5 | - |
430 | ≤0.12 | ≤0.75 | ≤1.0 | ≤0.040 | ≤0.03 | ≤0.60 | 16.0-18.0 | - |
Materiaal | Thermische behandeling | Temperure F (c) Min. | Hardheid | |
Brinell | Rockwell | |||
TP304 | Oplossing | 1900 (1040) | 192HBW/200HV | 90HRB |
TP304L | Oplossing | 1900 (1040) | 192HBW/200HV | 90HRB |
TP316 | Oplossing | 1900(1040) | 192HBW/200HV | 90HRB |
TP316L | Oplossing | 1900(1040) | 192HBW/200HV | 90HRB |
TP321 | Oplossing | 1900(1040) F | 192HBW/200HV | 90HRB |
TP347 | Oplossing | 1900(1040) | 192HBW/200HV | 90HRB |
OD, duim | OD Tolerantieduim (mm) | GEWICHTStolerantie % | De duim van lengtetolernace (mm) | |
+ | - | |||
≤ 1/2 | ± 0,005 (0,13) | ± 15 | 1 / 8 (3,2) | 0 |
> 1/2 ~1 1/2 | ± 0,005 (0,13) | ± 10 | 1 / 8 (3,2) | 0 |
> 1 1/2 ~< 3="" 1=""> | ± 0,010 (0,25) | ± 10 | 3 / 16 (4,8) | 0 |
> 3 1/2 ~< 5="" 1=""> | ± 0,015 (0,38) | ± 10 | 3 / 16 (4,8) | 0 |
> 5 1/2 ~< 8=""> | ± 0,030 (0,76) | ± 10 | 3 / 16 (4,8) | 0 |
8~< 12=""> | ± 0,040 (1,01) | ± 10 | 3 / 16 (4,8) | 0 |
12~< 14=""> | ± 0,050 (1,26) | ± 10 | 3 / 16 (4,8) | 0 |
Groottegrafiek:
OD | Muur (duim) |
Materialen | Norm | Werkdruk (MPa) |
Lengte |
1/8“ | 0,02, 0,028, 0,035 | Austenitic staal 304L (UNS S30403) Austenitic staal 316L (UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) |
Astm-269 Astm-632 Astm-789 Astm-B 704 |
60-120 Mpa | Aangepast |
3/16“ | 0,02, 0,028, 0,035, 0,049 | ||||
1/4“ | 0,02, 0,028, 0,035, 0,049, 0.065.0.083 | ||||
5/16“ | |||||
3/8“ | |||||
1/2“ | |||||